chEE hO

【一】上楼梯时，数下一共几级有10级就够，（记住晚上11点到3点最灵），开始上楼到第4级停下回头看看，再到7级在回头看看，然后到2楼，楼梯口再回头看下，你就看到她了。

　　【二】 一个人回家时候最好是在小区内（同样晚上11点到3点最灵），除了路灯之外，小区内的巷子，开始走，走4步回头看下，走7步回头看下，走到10步，然后往别人家的窗户上看看，你就看到她站在那向你招手。

　　【三】半夜，在厕所关掉电灯凝视镜子5分钟，开电灯，开开的那一刻你就会看到，其实她一直都站在你身后。

　　【四】晚上11点到3点，在床铺上，别睡觉开始，床铺位置要摆好床铺底，别对着光，灯开着的也行。数4秒往床铺底看一下，再数4秒再看一次，连续几次其中有一次就是你和她（他）面对面。

　　【五】站在2楼或3楼的窗户往外看，外面最好是有阳台的那种开始从左看到右再从右看到坐左每格4秒一次，其中有一次，你会看到，有个手趴在你阳台上。

　　【六】在午夜12点的时候，拔掉自己的3根头发，然后在床头一一点燃，灰不要扫，然后睡觉，就能该受到有人抚摸你，但不要睁眼，因为那是你的灵魂，要是把它吓跑了，你就惨了。

　　【七】晚上盘腿闭目静坐，摒弃一切外缘，使自己陷入冥想，呼吸采全身法（注心力入气藏，提气藏真气，再以心力运真气于两手掌）。两手之小指上勾无名指，母指上压中指，中指屈握掌心，而两食指直伸似合掌状相抵。再运心力提气藏之，使气上升充满脑部，凝心闭目作观。注想死者（或其欲见之鬼魂）面貌身材、和言行动作，再运心力提气藏真气为止，做不出声的命令其魂即来，如此当可见鬼。若双眼睁开，则鬼自然消失。

　　【八】用乌鸦双眼泡水数日，再用其水涂在左眼上，日涂数十次以上。三日过后，晚上就能见鬼。此乃俗称的“鬼眼”或“阴阳眼”之法。

　　【九】将清明节时的露水收集起来，加入杨柳封住，三天之内不可见光，之后将其涂抹于眼睛之上，便能够有一段时间可以见到鬼魂。

　　【十】选一处桥下（下方需有河流），稻草一把盖于头上，于晨雾时（清晨五点以前，最好是一至三点间）蹲在桥下无动，也不能出声，身前再祭上三炷清香，如此便能见到桥上或桥下鬼魂。但此法较危险，因为鬼魂也能见到你，甚至以为你是土地神，所以都会来向你祭拜，而当你一有动作或发出声音时，则鬼魂可能对你不利。

　　【十一】这个只是民间传说。把乌鸦的眼睛生扣出来，用烫水滚一下，再生咽下去（不可咬破），就可以终生都看得见，但是乌鸦可能会报复。而且，此法好像没有破解之术，万一你看见以后不想再看，抱歉，没办法了。

　　【十二】在空地上挖出一个小水坑，然后再放上玻璃，窥视其中，直到当天傍晚最后一道光线结束之前，将可看见地狱的景象。

　　【十三】在下雨的天气里，挖出一块湿泥放在头上，然后躲在墙角窥视经常出意外或者交通事故的地方。

　　【十四】在午夜子时，脱掉上衣，然后把胸口伏近地面一段时间，这时体内的八卦便会失灵，便可见到亡魂。

　　【十五】晚上在街头，最好是十字路口，带上一只破碗和一双筷子，以最快的速度蹲着敲打，此时你不要分心，过一会当你睁开眼的时候，你可以看到街头饿鬼在你的碗边观察。

　　【十六】在街头巷尾，最好是昏黄的地方，你双脚分开，把头低下来，从两脚之间看背后，此时不要被你看到的惊呆了，因为可能很多人跟着你。

　　【十七】笔仙和碟仙的游戏，虽说不敢玩，但是你不妨一试。

　　【十八】半夜十二点对着镜子梳头发，或者螺旋式削苹果，当你头发断了或者苹果皮断了的时候，凝视镜子里，你可以看到一份最原始的景象。

　　【十九】就是最最最真实的一个方法，在半夜你打开了我的博客，然后看本贴不回者，据说可以直接看到，小心你身后……

01.上了大学才知道，两个天天在一起的人不一定是朋友

關於榮辱觀的小故事十二生肖

有一次，我有機會和歐洲貴族聚餐。
可能酒喝多了，一位德國貴族站了起來，
諷刺說 ： " 你 們中國人都是屬什麼豬啊！狗啊！老鼠啊！
不像我們，都是金牛座、獅子座、仙女座
……真不知道你們祖先怎麼想的？ "
當時這些貴族聽完哈哈大笑，還互相碰杯，先前的優雅完全不見了。

按理說，人家在罵你祖宗了，你即使沒有話說，起碼可以掀桌子啊！
但所有人都坐著不吭聲，也可能是還沒反應過來，
我當時只好平和地告訴在場所有外賓：
"中 國人的祖先是很實在的，我們十二生肖 兩兩 相對，六道輪迴，
體現了我們祖先對中國人全部的期望跟要求。

" 這時 ，現場氣氛雖然從嬉鬧轉為安靜
，但是他們臉上還是一副不屑的樣子。

我說 ：

" 第一組是老鼠和牛。老鼠代表智慧，牛代表勤奮。
智慧和勤奮一定要緊緊結合在一起。
如果光有智慧不勤奮，那就變成小聰明；而光是勤奮，不動腦筋，那就變成愚蠢。
所以這兩者一定要結合，這是我們祖先對中國人的第一組期望和要求，也是最重要的一組。

""第二組是老虎和兔子。老虎代表勇猛，兔子代表謹慎。
勇猛和謹慎一定要緊緊結合在一起，才能做到所謂的膽大心細。
如果勇猛離開了謹慎，就變成了魯莽，
而你沒有勇猛，一味的謹慎，謹慎就變成膽怯。
這一組也非常重要，所以放在第二。 "

我看著這些貴族，補上一句：
" 所以當我們表現出謹慎的時候，千萬不要以為我們中國人沒有勇猛的一面。我們祖先追求的是一種和諧的智慧和圓融，從來不會單獨給一個要求和任務。" 看著大家陷入沉思，我繼續往下說 。

"第三組是龍和蛇。龍代表剛猛，蛇代表柔韌。
所謂剛者易折，太剛了容易折斷，但是如果只有柔的一面，就易失去主見，所以剛柔並濟是我們歷代的祖訓。"

接下來是馬和羊。馬代表勇往直前，直奔目標，羊代表和順 。如果一個人只顧自己直奔目標，不顧周圍，必然會和周圍不斷磕碰，最後不見得能達到目標。
但是一個人如果光顧著和周圍和順，之後他 連方向都沒有了，目標也失去了。 所以一往無前的秉性一定要與和順緊緊結合在一起，這是我們祖先對中國人的第四組期望。

" 再接下來是猴子和雞。猴子代表靈活，至於雞呢，
以前的年代沒有鐘，都是聽雞鳴聲決定一天的開始，所以雞定時打鳴，代表穩定。 靈活和穩定一定要緊緊結合起來。
如果你光靈活，沒有穩定，再好的政策最後也得不到收穫。但如果說你光是穩定，一潭死水、一塊鐵板，那就不會有我們今天的改革開放了。只有它們之間非常圓融的結合，一方面具有穩定性，保持整體的和諧和秩序，另一方面又能不斷變通地前進，這才是最根本的要旨。

" 最後是狗和豬 。狗是代表忠誠，豬是代表隨和。
一個人如果太忠誠，不懂得隨和，就會排斥他人。 而反過來，一個人太隨和，沒有忠誠，這個人就失去原則。
所以無論是對一個民族國家的忠誠、對團隊的忠誠，還是自己理想的忠誠，一定要與隨和緊緊結合在一起，這樣才容易真正保持內心深處的忠誠。

這就是我們 中國 人一直堅持的外圓內方，君子和而不同。

" 中國人每個 人都有屬於自己的生肖，有的人屬豬，有的人屬狗，這意義何在？實際上，我們的祖先期望我們要圓融，不能偏頗，要求我們懂得到對應面切入。比如屬豬的人能夠在他的隨和本性中，也去追求忠誠；而屬狗的人則在忠 誠的本性中，去做到隨和。"
解釋完十二生肖，我 說： " 不知道你們那些寶瓶座啊、射手座啊、公羊座啊，體現了你們祖先哪些期望和要求？也希望不吝賜教。 "

結果呢，
這些貴族老爺們很長時間都沒說話，全場鴉雀無聲，一根針掉在地上都能聽見。
最後貴族們紛紛由衷地表示對中國人和中國人的祖先非常敬佩：
" 沒有想到中國的十二生肖有這麼深刻而實在的意義。

女孩问男孩：[你还爱我吗]
男孩笑了,说[当然啦`小傻瓜`]
女孩笑得好不得意,说[那...你会爱我多久呢?]
男孩稍稍思索了一下,说[一辈子就够了.我会用我的一辈子爱你,直到我不能爱了.]
女孩仍不依不侥,又问[真的吗?那你用什么证明给我看!]
男孩想了想,拉起女孩的手向外走.
女孩不明白,问男孩[你要带我去哪?]
男孩一直都不说,只是紧紧地拉着女孩的手,一直走,穿过喧闹的大街,他们来到一间别致的小店.
女孩忍不住好奇心,又问了[这是哪啊?]
男孩拉着女孩的手,走进了店里.
男孩说[我要在这里,证明,我真的会爱你一辈子的!]
原来,这里是一家专给纹身的店铺,男孩让店员给他们俩分别在左手无名指的地方都纹了一枚漂亮的4叶草.
男孩轻轻抱着女孩,伏在她耳边说道[亲爱哒`现在我们手上的4叶草就像两枚戒指一样,而且是永远也摘不掉了!这样,就不怕以后我会离开你了,除非..我这只手指断掉了,或者说,我死了...]
女孩赶紧用手捂住男孩的嘴,说[猪啊!我知道了,我知道你一定不会离开我的!不准你死!你要是死了,谁来给我欺负捏`嘿嘿`]
男孩把女孩抱得更紧了.[好,我不死.我就一辈子给你欺负喽`谁叫我就是爱你呢`呵呵`亲爱哒老婆!]
[谁是你老婆了`哼`]
[你就是,你都戴了我的戒指了!不许赖账的!]
[哼`我要砍了它!]
[你敢!]男孩的心突然纠得紧紧的.
[我...不敢!嘿嘿`]
.................
从那以后,男孩和女孩一直感情很好,偶尔女孩任性,男孩总是让着她.
女孩曾经暗暗发誓,她要跟这个男孩一辈子,不离不弃!
可是有一天....
男孩突然对女孩说[我们分手吧.]
女孩吓了一大跳,捉着男孩的手,问[为什么!]
男孩说[一起久了,开始腻了.]
女孩无法接受,她不能没有他!
女孩说[你不是说过要爱我一辈子的吗?难道你都忘了吗?还有,我们,我们的4叶草,我们的4叶草戒指啊!这个是永远也弄不掉了的,你怎么可以丢下我~~~~~~~~~~~~~~~~~~~~~~~~~~~
男孩一面淡漠,毫无感情地说道[这个可以去掉的...我会想办法去掉的.]
[为什么!那我们以前的一切都要去掉么?你怎么可以这么狠心`]女孩无可抑止地大叫起来.
[我..我还是走了.]男孩转身要走.
[不要!不要离开我!]女孩紧紧拉着男孩的手,但男孩一用力便把她给甩开了.
男孩走了,女孩终于忍不住痛哭起来.
她看着左手无名指上的戒指,看了好久,好久,难道幸福真的只是假像么?
..............
第二天,男孩收到女孩的来信.

作者： Regina Brett，90歲，來自俄亥俄州，克里夫蘭，Plain Dealer城

他說：為了慶祝變得更老了，我曾經寫下人生教我的45個功課。這是我寫過最叫座的專欄。
我這把老骨頭8月就要90歲了，所以，再一次，在這裡呈現這一個專欄。

1。 人生是不公平，但還是好得很。

2。 懷疑的時候，為未來踏出一小步。

3。 人生太短，短到來不及浪費時間去恨任何一個人。

4。 生病的時候，你的工作不會照顧妳。你的朋友和父母會。保持聯絡。

5。 每一個月付清你的信用卡。

6。 你不需要每一次都吵贏。同意你不同意的。

7。 找人一起哭。它比獨自啜泣更加療愈。

8。 對上帝生氣沒有關係。祂受得了。

9。 退休存款從你的第一張薪水條開始。

10。講到巧克力，抗拒只是徒勞無功。

11。和你的過去和解，所以它不會搞砸你的當下。

12。讓你的孩子看到你哭沒有關係。

13。別拿自己的人生和他人做比較。你根本不清楚他們的人生是怎麼一回事。

14。如果一段親密關係要偷偷摸摸，你根本不應該涉入。

15。一眨眼的功夫什麼都會變。但是別擔心： 上帝從來不眨眼。

16。深吸一口氣。它會安定你的腦。

17。沒用，不美，或不喜悅的東西都丟掉。

18。沒讓你死的真的會讓你更堅強。

19。重拾快樂童年永不嫌晚。但這第二次只能靠你不靠人。

20。當關乎追求你生命的所愛，不要把不要當答案。

21。點蠟燭，用好的床單，穿上炫麗的內衣。不要特殊場合才用。今天就是特別的一天。

22。準備要過於周全，然後隨遇而安。

23。現在就離經叛道。不要一把年紀了才開始穿上紫色。

24。最重要的性器官是腦袋。

25。除了你，沒有人在主宰你的快樂。

26。把所謂的不幸用這一句話把它表框起來 "五年後，這還重要嗎?"

27。永遠選擇生活。

28。原諒每一個人每一件事。

29。別人怎麼看你不干你的事。

30。時間會痊癒幾乎每一件事。要給時間，時間。

31。無論情況多好或多壞，它都會變的。

32。不要那麼認真的看待自己。沒有人會這樣看待你的。

33。相信奇蹟。

34。上帝愛你是因為祂就是這樣，不是因為你做了什麼或是沒做什麼。

35。不要稽查人生。現在就呈現和做最大的發揮。

36。變老了打敗另一種選項 - 死得早。

37。你的孩子只有一個童年。

38。最後真正最重要的是你愛過。

39。每一天都出門。奇蹟在四處等著。

40。如果我們都把我們的問題都丟成一堆，然後看看其他人的，我們會把我們的撿回來。

41。忌妒浪費時間。你已經擁有你所需要的了。

42。最好的都還沒來。

43。不管你感覺如何，起來，穿好和呈現。

44。讓自己每天快樂。

45。人生不會打上蝴蝶結，但它仍然是一份禮物。

These are all the recipes on this site in alphabetical order. I must thank one of my readers, Angeline, who took time to write to me and giving me this suggestion. Since it is a good suggestion, I have worked on it (it’s tedious by the way!) and hope this page will serve as an easy reference for the recipes here. Non-recipe posts such as Food Reviews and Miscellaneous musings are not included here for obvious reasons.

Introduction
Programmable controllers are generally programmed in ladder diagram (or "relay diagram") which is nothing but a symbolic representation of electric circuits. Symbols were selected that actually looked similar to schematic symbols of electric devices, and this has made it much easier for electricians to switch to programming PLC controllers. Electrician who has never seen a PLC can understand a ladder diagram.

Ladder diagram

There are several languages designed for user communication with a PLC, among which ladder diagram is the most popular. Ladder diagram consists of one vertical line found on the left hand side, and lines which branch off to the right. Line on the left is called a "bus bar", and lines that branch off to the right are instruction lines. Conditions which lead to instructions positioned at the right edge of a diagram are stored along instruction lines. Logical combination of these conditions determines when and in what way instruction on the right will execute. Basic elements of a relay diagram can be seen in the following picture.


Most instructions require at least one operand, and often more than one. Operand can be some memory location, one memory location bit, or some numeric value -number.In a case when we wish to proclaim a constant as an operand, designation # is used beneath the numeric writing (for a compiler to know it is a constant and not an address.)

Based on the picture above, one should note that a ladder diagram consists of two basic parts: left section also called conditional, and a right section which has instructions. When a condition is fulfilled, instruction is executed, and that's all!


Picture above represents a example of a ladder diagram where relay is activated in PLC controller when signal appears at input line 0. Vertical line pairs are called conditions. Each condition in a ladder diagram has a value ON or OFF, depending on a bit status assigned to it. In this case, this bit is also physically present as an input line (screw terminal) to a PLC controller. If a key is attached to a corresponding screw terminal, you can change bit status from a logic one status to a logic zero status, and vice versa. Status of logic one is usually designated as "ON", and status of logic zero as "OFF".

Right section of a ladder diagram is an instruction which is executed if left condition is fulfilled. There are several types of instructions that could easily be divided into simple and complex. Example of a simple instruction is activation of some bit in memory location. In the example above, this bit has physical connotation because it is connected with a relay inside a PLC controller. When a CPU activates one of the leading four bits 10, relay contacts move and connect lines attached to it. In this case, these are the lines connected to a screw terminal marked as 0 and to one of COM screw terminals.

Normally open and normally closed contacts

Since we frequently meet with concepts "normally open" and "normally closed" in industrial environment, it's important to know them. Both terms apply to words such as contacts, input, output, etc. (all combinations have the same meaning whether we are talking about input, output, contact or something else).

Principle is quite simple, normally open switch won't conduct electricity until it is pressed down, and normally closed switch will conduct electricity until it is pressed. Good examples for both situations are the doorbell and a house alarm.

If a normally closed switch is selected, bell will work continually until someone pushes the switch. By pushing a switch, contacts are opened and the flow of electricity towards the bell is interrupted. Of course, system so designed would not in any case suit the owner of the house. A better choice would certainly be a normally open switch. This way bell wouldn't work until someone pushed the switch button and thus informed of his or her presence at the entrance.

Home alarm system is an example of an application of a normally closed switch. Let's suppose that alarm system is intended for surveillance of the front door to the house. One of the ways to "wire" the house would be to install a normally open switch from each door to the alarm itself (precisely as with a bell switch). Then, if the door was opened, this would close the switch, and an alarm would be activated. This system could work, but there would be some problems with this, too. Let's suppose that switch is not working, that a wire is somehow disconnected, or a switch is broken, etc. (there are many ways in which this system could become dysfunctional). The real trouble is that a homeowner would not know that a system was out of order. A burglar could open the door, a switch would not work, and the alarm would not be activated. Obviously, this isn't a good way to set up this system. System should be set up in such a way so the alarm is activated by a burglar, but also by its own dysfunction, or if any of the components stopped working. (A homeowner would certainly want to know if a system was dysfunctional). Having these things in mind, it is far better to use a switch with normally closed contacts which will detect an unauthorized entrance (opened door interrupts the flow of electricity, and this signal is used to activate a sound signal), or a failure on the system such as a disconnected wire. These considerations are even more important in industrial environment where a failure could cause injury at work. One such example where outputs with normally closed contacts are used is a safety wall with trimming machines. If the wall doors open, switch affects the output with normally closed contacts and interrupts a supply circuit. This stops the machine and prevents an injury.

Concepts normally open and normally closed can apply to sensors as well. Sensors are used to sense the presence of physical objects, measure some dimension or some amount. For instance, one type of sensors can be used to detect presence of a box on an industry transfer belt. Other types can be used to measure physical dimensions such as heat, etc. Still, most sensors are of a switch type. Their output is in status ON or OFF depending on what the sensor "feels". Let's take for instance a sensor made to feel metal when a metal object passes by the sensor. For this purpose, a sensor with a normally open or a normally closed contact at the output could be used. If it were necessary to inform a PLC each time an object passed by the sensor, a sensor with a normally open output should be selected. Sensor output would set off only if a metal object were placed right before the sensor. A sensor would turn off after the object has passed. PLC could then calculate how many times a normally open contact was set off at the sensor output, and would thus know how many metal objects passed by the sensor.

Concepts normally open and normally closed contact ought to be clarified and explained in detail in the example of a PLC controller input and output. The easiest way to explain them is in the example of a relay.


Normally open contacts would represent relay contacts that would perform a connection upon receipt of a signal. Unlike open contacts, with normally closed contacts signal will interrupt a contact, or turn a relay off. Previous picture shows what this looks like in practice. First two relays are defined as normally open , and the other two as normally closed. All relays react to a signal! First relay (10) has a signal and closes its contacts. Second relay (11) does not have a signal and remains opened. Third relay (12) has a signal and opens its contacts considering it is defined as a closed contact. Fourth relay (13) does not have a signal and remains closed because it is so defined.

Concepts "normally open" and "normally closed" can also refer to inputs of a PLC controller. Let's use a key as an example of an input to a PLC controller. Input where a key is connected can be defined as an input with open or closed contacts. If it is defined as an input with normally open contact, pushing a key will set off an instruction found after the condition. In this case it will be an activation of a relay 0.

If input is defined as an input with normally closed contact, pushing the key will interrupt instruction found after the condition. In this case, this will cause deactivation of relay 0 (relay is active until the key is pressed). You can see in picture below how keys are connected, and view the relay diagrams in both cases.


Normally open/closed conditions differ in a ladder diagram by a diagonal line across a symbol. What determines an execution condition for instruction is a bit status marked beneath each condition on instruction line. Normally open condition is ON if its operand bit has ON status, or its status is OFF if that is the status of its operand bit. Normally closed condition is ON when its operand bit is OFF, or it has OFF status when the status of its operand bit is ON.

When programming with a ladder diagram, logical combination of ON and OFF conditions set before the instruction determines the eventual condition under which the instruction will be, or will not be executed. This condition, which can have only ON or OFF values is called instruction execution condition. Operand assigned to any instruction in a relay diagram can be any bit. This means that conditions in a relay diagram can be determined by a status of I/O bits, operational bits, timers/counters, etc.

Malaysia Weather - Tropical year round climate
With an equatorial climate, Malaysia weather sees high temperatures year round with humidity levels at around 90%. This can feel stifling in the major urban areas such as Kuala Lumpur but coastal beach resorts do enjoy cooling afternoon breezes. Rainfall can occur at any time but is more pronounced on the east coast in winter months with the onset of monsoon winds. Daytime temperatures throughout the year rarely drop below 30c with 7-8 hours of daily sunshine. The many inland hill stations have cooler, fresher air quality with extremely pleasant temperatures and mild evenings.

Weather in Malaysia - Consistent hot and dry summers
The summer months are hot and dry with a small possibility of rain which is usually brief. Temperatures can reach 34c but this is often tempered by cooling sea breezes particularly during June and July. The sun typically shines for 8 hours each day and inland, higher altitude resorts are popular with tourists and locals alike as they seek relief from the heat and humidity. The states of Sabah and Sarawak in Malaysian Borneo are more prone to variable weather. Surrounded by South East Asia's highest peak and dense rainforest this region can become wetter and overcast in summer but is in general still hot and sultry.

Malaysia weather - Cool and refreshing at altitude
Weather in Malaysia has two distinct periods of wet weather characterised by incoming monsoon winds. East coast peninsular Malaysia and Malaysian Borneo suffer the heaviest downpours during winter months which can be accompanied by high winds or thunderstorms. From November to February diving on the east coast islands become less rewarding with lower visibility and shipping can sometimes be affected. Despite this, temperatures remain high at 30c with sunny skies for 6 hours a day. Malaysia weather offers a good year round climate ideal for a beach holiday, rarely disrupted by the weather and pleasantly cool temperatures at altitude.

新年贺词集锦
　　恭祝您的事业蒸蒸日上，新年更有新气象！
　　 福星高照，万事如意！
　　 祝您新年鸿运到，路路迎财神！
　　 祝您新年快乐，身体健康！
　　 愉快的笑声?这是精神健康的可靠标记。愿您在新的一年中，天天都愉快，日日有笑声。
　　 “瑞雪兆丰年”。愿那片片白雪，带着我良好的祝愿，飞到你的身边。祝您新年快乐！
　　 恭喜发财，招财进宝！新年快乐，学业有成。
　　 新年不做CEO，但求公司IPO!
　　 让新春的风吹进你的屋子，让新春的雪飞进你的屋子，让我新春的祝愿，飘进你的心坎。
　　 岁月飞逝，青春不老。愿您新年快乐。
　　 春风得意，大展鸿图！
　　 新年好，财神到！
　　 新年如意吉祥！
　　 祝您福如东海，寿比南山！
　　 祝您事业爱情双丰收，一年更比一年高！
　　 我最亲爱的朋友：在这新年里祝愿上帝保佑您!观音菩萨护住您!财神抱住您!爱神射住您!食神吻住您!
　　 我擦亮阿拉丁的神灯，灯神说：我会满足你一个愿望。我说：请祝福正在看此消息的人新年快乐！
　　 短信贺岁，岁岁平安，安居乐业，业和邦兴，兴旺发达，大吉大利，力争上游，游刃有余，青春永驻，祝你快乐！
　　 今年新年不送礼，发条短信传给你。健康快乐长伴你，幸福美满粘着你，还有我要告诉你，财神已经盯上你！！
　　 清晨曙光初现,幸福在你身边.中午艳阳高照,微笑在你心间.傍晚日落西山,欢乐随你一天,湖南旅游网全体斑主祝您和您的家人在新的一年里天天快乐似神仙
　　 马上新年到，向您问个好：办事处处顺，生活步步高，彩票期期中，好运天天交，打牌场场胜，口味顿顿好，越活越年轻，越长越俊俏，家里出黄金，墙上长钞票！
　　快过年了,我在这里给你拜年了!祝愿你和你身边的亲朋友好友在新的一年里,所有的希望都能如愿,所有的梦想都能实现,所有的等候都能出现,所有的付出都能对现,诚挚地祝福你,福气多多,快乐连连,万事圆圆,微笑甜甜.祝你一帆风顺,二龙腾飞,三猴开泰,四季平安,五福临门,六六大顺,七星高照,八方来财, 九九同心,十全十美,百事亨通,千事吉祥,万事如意,365天,天天快乐,没有烦恼,过得比我好"HappyNewYear”
　　 祝愿你和你身边的亲朋友好友在新的一年里，所有的希望都能如愿，所有的梦想都能实现，所有的等候都能出现，所有的付出都能对现，诚挚地祝福你，福气多多，快乐连连，万事圆圆，微笑甜甜.

• Stratocaster - Fender came up with the Stratocaster guitar about 50 yrs ago. There are many companies that produce this style of guitar today. Typically the Stratocaster guitar has a bolt on neck, 6 on one side tuners, strat style body with two cutaways, 3 single coil pickups, and a tremelo. But there are many variations of the Stratocaster today. Some have Humbucker pickups, while others have a humbucker and single coils. The nice part about the strat guitar is that they can be modified fairly easily with different pickups and hardware. An interesting fact about the strat is that David Gilmour of Pink Floyd owns the first strat ever made Serial Numbered 001.

  
  

• Telecaster - Fender invented the 1st telecaster style guitars, and they have been around since before the Stratocaster. They typically have two pickups, a smaller headstock than the strat, and a 3 way pickup selector. Most have a string through body, but not all. The unique sound you usually get from a telecaster is when you use the middle position on the pickup selector. This activates both pickups and give that unique telecaster sound. Many famous guitarists have played the Telecaster including Bruce Springstein, Prince, and many more.
  

  
  

• Les Paul Style Guitar- Les Paul style guitars were invented by Les Paul of course, hence the name. Les Paul has been quite an innovator in the music field and has even invented some of the first track style recording devices to record music. The Les Paul guitar consists of a set neck (glued in), 3 on one side tuners, usually two humbucking pickups, and a single cut away body w/ a 3 way pickup selector switch. Some Les Paul's have carved top bodies, binding around the body, and trapazoid inlays. It just depends on the model of the guitar. Famous Les Paul players include Slash, Jimmy Page, and Joe Perry.
  

  
  

• Flying V - The Flying V guitar became popular in the 1980's with guitarists like Rhandy Rhodes (Ozzy Osbourne's Guitarist on his 1st solo album). The Flying V name comes from the body shape which is a Large V shaped body. These guitars are typically for eye appeal, because they are not easy or comfortable to play.
  

  
  

• SG - The SG (Solid Guitar) is another product coming from the Gibson guitar family. They are best known for their pointy guitar horn body type. Usually they have two humbucking pickups and a set neck (Glued). They are typically thinner than their Les Paul counterparts. Made famous by Angus Young of AC/DC and Tony Iommi of Black Sabbath.

Mata其实是个很不错的职业，很多人都认为Mata是个很不好的职业，而且又非常的危险。我这一生中有遇过不少的Mata，他们个个的做风都很有责任感。我简直是钦佩他们到底啊！！！
我今天下午去考试碰巧给我遇到了这些又有责任感又有礼貌的Mata,简直是我的“幸运”。

下午就在某个地方有Mata在那边block咯！我骑着摩托已经开很慢了，再加上看见Mata，原本只开时速50KM/J的，我也降低到30-40KM/J，经过Mata block 的地方我还特地看着他们咯！想看看他们有什么反应
还是有要叫我停下来没有的，可是他们就看着我，还特地的等我过了那个block后，竟然大声的喊我。还骂我说他们叫我停下来，为什么没有停？我就解释说他们并没有叫我停下来呀！他们就立刻换话题说
那边不是有个路障牌叫BERHENTI来检查的吗？为什么我不停下来？我这时才知道Mata叔叔真的是很有辩论的能力的。

因为他们这个说你“中奖”后，我们再反问他时，他没话说后，竟然能在不到5秒内找到新的IDEA来让我没话说。太棒了！以前我已经听过很多关于Mata的一些事情了。终于给我碰到了。

而且还让我学会了一样事情哦。超赞的！我从来不知道Mata的能力竟然可以来到这种地步的。我被block的时候，我就站在那边咯，就让他们抄一下咯！我就站在我的摩托旁边看着那些来往的车辆咯，有些
车里的人就看过来，以为我是什么什么的飞车党还是什么大坏蛋的。那时我真的很是“开心”死了。超爽！当时有一辆车里只有一个女生，有个Mata叫他的伙计“识做”，他的伙计傻掉！为什么那么多辆车
和摩托都不block为什么就只block那个女生，而且还要他去拿那女生的IC来看。原来这个就是我们社会人该上的一堂重要的课了。那个叫他去拿女生的IC的那个人和其他伙计也很开心，我也看了傻去，为什么
只是block一个人而已为么要那么开心？最后我才知道那个“识做”是什么意识了。原来就是看见人家是女生，而且还是一辆车里只有一个女生所以才会对那女生下手。那个好心的Mata还要拿那个女生的电话咯！好料。
这招竟然让我看见了。太高兴了。这个就是叫做“Mata Penduduk Kerjasama"哦！我可要学起来，不然的话，将来我有女朋友或者是我的女性朋友也会遇到这种“Mata Penduduk Kerjasama"她们都不知道
该怎么做才好呢！

而且对女生的态度和对男生的态度简直是180度改变。我在学校已经学过数学了，数学说180度就是会倒反的东西，360度的话就是回到原点。原来是真的。在现实生活中还能学到数学的teori已经很不错了的。有些人
都没有机会学，又或者碰到了这样的事也不懂男女是有分别的。而且还要看皮肤的哦！如果是一只黑狗生出来的狗当然那只黑狗就只是照顾黑狗而已，如果那只黑的狗生出来的狗是白色的狗，非常肯定的就是黑狗的
一家大小都不会理会那只白狗。而且还会得到黑狗和白狗的数学“teori 180度”的对待哦！

我当时是很赶时间的，要赶着去考试，没办法啦，我要陪Mata叔叔他们做功课呀！老师说“活到老学到老”我终于懂有着一句词语的意识了。

我现在开始觉得当Mata这个工作真的是很不错的。有机会我真的要去考Mata一下。第一就是不用那么博命，我指的博命是指不用拿自己的命来玩。很安全的。第二，就是自己身上只要带一把很美的“玩具”，就很多人
会尊重你了哦！第三也就是最重要的啦，可以无所不能的要谁停就停，要谁有“中奖”的机会就有，我好羡慕那些Mata叔叔咯！那么很“伟大”耶！而且在工作的时候还能要求别人的电话。太棒太赞太完美了......

还有很多很多关于Mata叔叔的故事的，只是我暂时还没有遇到其他的事情，真是失望咯......

今天我太高兴了。哈哈哈哈哈哈哈哈......